UK Stampers' Altered Art Challenge- Pegs

You may have picked up that I host an altered art swap on UK Stampers each month. Last month we did pegs, which I have wanted to do for a while. I had been sent a couple of pegs to play with (thanks, Ann!) and this was my opportunity. And since I don't do simple... this is also an altered matchbox!

Colour: The usual culprits- Distress Inks and Liberon Gilt wax, plus the book was covered with an old baby-wipe I had saved which had been used to clean up after paint and ink.
Stamp: Paperartsy swirl. It is faint, but I promise it is there!
Other: Book pages, cover from a match-box, mount-board, wire, beads, button, pins, Prima flower, vellum butterfly (free from 'Making Cards' magazine), and lots of PVA glue.

The book was a bit fiddly to make, but worth it to me. The ends of the pages are cut from my book and sized to fit inside the matchbox cover. They were gilded so that they would blend in with the front of the book, which is solid with 'pretend' pages. There was a gap between the two stacks of end pages which was big enough to take the peg doll. Then I made a book cover as I would for a real book. It even opens! You may need to click on the photos for more detail... :)

My camera doesn't like black... UK Stampers CJ entry

This is Jean's journal, and I wasn't surprised when I saw the interesting page shape and the Zettiology stamp. I loved the stamp straight away, but did take my time deciding what to do with her. Early in the month I knew I wanted to use my Cherry Pie art doll, but it was so much bigger than the page. Then a song came on the radio and that was it... listen here:

Shame the camera doesn't pick up the details- I used a lot of interference mica powders in the background to create a sort-of psychedelic wallpaper effect. The lyrics to the opening verse are written around the door, and in the mini-envelope is the key to the door!

Colour: Versafine, Paint Dabbers, lots of black ep, Moonglow ep, Stickles, Stardust pen, gold paint, Stazon, Ranger white pen, Cosmic Shimmer/Perfect Pearls, Sharpie pen
Stamps: Zetti (head), Cherry Pie (art doll and flourish)
Other: Funky foam (to create the niche behind the door), Grungeboard door furniture, tiny key from my stash, corrugated card (for door, flattened using Cuttlebug)

Playing card swap plus Lots to do challenge- boxes

I don't normally post photos of my altered art swap piece before everything is swapped out (I don't want people to say 'I don't want that'!) but as the Lots to do challenge this week was boxes, I just had to break my tradition. Sam had posted a tutorial to her Technique Zone blog, and I found it fitted my original idea (house of cards) really well. My lovely friend, Lucy, had lent me this stamp, and it all just came together so well. Where would we be without friends, eh?

Colour: Whispers markers, Versafine, Distress Ink, Whispers inkpad, fineline pen, Sharpies
Stamps: Crafty Individuals (birds), Paperartsy (swirls)
Other: Playing cards, acetate, white card, Pinflair glue gel, mountboard

The shadows in the background are not a trick of the light, I stamped first onto acetate and then coloured the birds black, before placing on the bottom playing card. I like the feeling of depth this gives. The layers are supported by thin strips of mountboard glued in place with white craft glue. And I hope that all my friends who twitter enjoy the little joke about birds tweeting to each other :)

Hannah's Pink CJ- Queen of He-ART-s

Here is another entry for our UK Stampers' 'Colours' CJ. This is Hannah's lovely little pink book, and for once I decided to stamp directly onto the page, as the page colour was so delicious! I love pink, but don't use it in my work as much as I used to, despite having lots of yummy paper in that colour. Must remember to use it more often...

Colour: Dee Greunig Blending Blox (again!), Distress Ink, Glimmer Mist, Sharpies, Stickles, Versafine, Stazon
Stamps: Elusive Images (small 'art'), Limited Edition, unknown 'A-R-T' signing stamps, Tim Holtz (Grunge Alpha)
Other: Playing card, border punch/fancy scissors (used to create paper lace), cardstock-weight vellum for corner, Ranger Crackle Accents (used on A-R-T)

Pat's Paper Bead Swap- A Bit of a Funny Story

This is the last of the Feb swaps, and I meant to post this picture last week! I think my blogging is destined to be like my washing- sometimes I do a load a day, then I don't do any for a few days which means I am back to frantic load-a-day again! Pat hosted this swap, and I happily put my name down for it as I have enjoyed making these paper and UTEE beads in the past. Little did I know how frustrating it would be to make 20 all at once! Now, you have to understand, I was the only one who had problems, so I think it is just me! And the resulting beads are pretty, so it was worth it really :)

Here is a quick tutorial if you want to have a go yourself:

1. This is the easy bit. Prepare an A4 piece of paper by colouring, stamping, whatever you like. Decide how long you want your beads to be and cut into long triangles, making the widest side the length you have decided on. Mine are 1.5cm, and I used my trimmer and just cut them quickly into the triangles. NOTE: Make 5 more than you want to end up with, just in case.
2. Find a bamboo skewer and, starting with the wide end of your triangle, wrap your paper tightly around until it looks like a bead shape, using a dab of glue every so often to keep the tension. Pull tight every so often, then start again as the whole thing unwinds. Undo every time it goes out of shape. Make as many beads as your nerves allow, then leave the project alone while you have a cup of tea. Go back to it when your patience has returned and finish all 25.
3. Put your melt pot on, and fill it with clear UTEE- admire the clarity then add flex to stop the beads from shattering when knocked. Note that the beautiful clear mixture has now gone yellow. Apply Versamark/glycerine to the end of your skewer and add your first bead near the end. Dip in the hot UTEE and then quickly rotate like a glas blower to make sure the UTEE sets in an even shape. Re-dip when you realise that you have a huge lump on one side. Repeat the twirling and set aside to cool (you can have two skewers on the go at once to save hanging around).
4. Using scissors, cut of the excess UTEE at each end of the bead so that you can slide the finished bead off. Admire how pretty it is. Go to your second skewer to do the same and realise that this skewer is wood, not bamboo, and therefore rough enough that your bead is completely stuck. Go and hunt for another bamboo skewer in the kitchen drawers. Oh well, you still have 4 spare beads and this won't happen again!
5. Do a few more perfect beads. You must be getting the hang of this! Then do exactly as you have been doing, pull the bead off the skewer, and watch it unwind from the inside, leaving you with a UTEE shell. Oh well, you still have 3 spare beads. Carry on, repeating this cycle until you have one short of your required total, and no more paper beads to dip. Desperately try to cut one more bead from the paper you coloured- phew, just! Dip your final bead, take it off the skewer, and go and have a big gin and tonic to calm your nerves.
6. Put the beads in a glass dish, and admire them. Knock them on the floor (must be the g and t!) and scrabble around to pick them all up. Then go and put them somewhere really, really safe so that you can photograph them and send them off.

When I look back on my bead-making experience, I have to laugh as it just shows how kack-handed I can be! I think I will stick to making just one or two at a time next time... and there will be a next time as it is the perfect way to get a bead to match your project. Good luck if you give this a try!

Bottlecap swap- a few of my favourite things...

I really got carried away making this little piece for the February altered art swap on UK Stampers. Good job too; the standard was really high, as ever, so I would have been embarrassed if I hadn't gone that extra mile! I used all of my favourite techniques and products :)

Colour: Alcohol inks, Stickles, Distress Inks, Versafine, Sakura clear stardust pen, Opals UTEE in black and gold, Perfect Pearls
Stamps: Cherry Pie
Other: Two bottlecaps (flattened with a hammer and a block of wood), sheer ribbon, adhesive metal tape, Cuttlebug and embossing folder, buttons, Krafty Lady art mould, Melt Pot, Papermania adhesive gem

(If you can read the words, they are from Twelfth Night- another of my favourite things!)

Stampbord brooch swap

Sid is hosting a Stampbord brooch swap at UK Stampers, and I was hit by inspiration for this one! I had been using my melt pot for another piece I have made (yes, for yet another swap!) and to use up the excess UTEE I poured it into some of my Krafty Lady Art Moulds. I loved the heart so much that it inspired the rest of the piece.

Colour: Dee Greunig Blending Blox (green), Stazon, Versafine, Gilt wax, Opals UTEE
Stamp: Hero Arts script
Other: Small Puffy Heart art mould, Grungeboard wings, Cuttlebug script embossing folder, Aurora Fusible Film, Stampbord, brooch pin, Pinflair glue gel

The colour of this is changeable, as I started with the Blending Blox before gluing and ironing on torn strips of Fantasy film. The wings were bent and glued on with a supporting blob of the Pinflair glue gel- my new favourite glue!

February Inchies- Oriental

You may realise this week that I have downloaded the contents of my camera, and am now trying to blog it all! This is my inchie swap for this month, and Sid gave us the theme of Oriental. Recently, I have been rifling through my scraps drawers before I start any new project, and this time I found a scrap of background paper that I made for my first Bind-it-all project in July 2007. It's nice to recycle :)

Colour: Nick Bantock inks, Perfect Pearls, Versafine, Versamagic (stamped into clay)
Stamps: Paperartsy (Buddha), Non Sequitur (chop)
Other: Das air-dry clay, red embroidery thread, black card

February ATCs- Friends

I love to try variations on a theme for my 3 for 3 swap ATCs each month, and this month I was playing with Versamark resist, Blending Blox and brayering, and metal embossed in the Cuttlebug. I am also trying to use up old stash! The Papermania flowers were bought the year they came out, and I have given them a new look by embossing and shaping them. Expect to see more of the same- they came in a big pack! Now I just need to find a new look for my enormous box of metal-rimmed tags...

Colour: Distress Inks, Dee Greunig's Blending Blox, Whispers back ink, Stazon, Paint Dabber, Sakura glaze pen, black fineline pen
Stamps: Kathy Davies (flower), Crafty Individuals (words and flourish)
Other: Drinks can metal, Papermania metal flowers, seed beads, glossy card

CJ page for Gail

This is my attempt at humour for Gail's CJ, and I think it gets the point across, although I'm not too convinced about my execution! Her stamp is the shoes, which just made me think about the Wizard of Oz (plus those funny radio and TV ads featuring the Wicked Witch of the West and her best friend, Vicky, have inspired me). I coloured over the image with my watercolour crayons again- I love the texture they add (I was channelling tornado!). I hope Gail likes it.

Colour: Watercolour crayons, Stickles (on shoes), Stazon, Distress Inks
Stamp: Mad Rat?
Other: Image of old house, acetate

Altered Domino Swap, plus mini-tutorial

This month's Altered Art swap on UK Stampers had the theme of dominoes. We each altered a domino, then incorporated it into a piece of work of our choice. I like this approach, as everyone has a different way of treating their domino. The pieces were all so different and gorgeous. See the slideshow here. My piece is a stamp book holder, and I have done a mini-tutorial for it (scroll down the page to see it). I call it mini because I didn't have time or a second pair of hands to be able to take any photos. First, the how-to of the decoration :)

Colour: Watercolour crayons/water-spray/drinking straw technique shown by Jo Capper-Sandon in Craft Stamper, Versafine, Versamagic, Distress Ink
Stamps: Stampin' Up, Crafty Individuals (postmark)
Other: Mountboard, old book pages, stamps (from a package sent to me by Marina from Cherry Pie), domino (the stamps are collaged on with beeswax using my Melt Pot).


My piece uses such simple techniques to construct it that I wanted to share them. I first came across the mitre trick when Tricia Morris showed it on Craft TV Weekly, which is sadly no more. I have used this technique before, to make a box file, and for the covers of my two circle journals. The trick is to treat your object as if it were a book, with two covers and a spine. I am giving the dimensions I used for this piece, but any variation will work.

What you will need:
Mountboard or greyboard
Cover paper and liner paper
Wet glue- I use white PVA
Something to spread the glue evenly- a foam brush or credit card is ideal
Ruler and pencil
Bonefolder

1. First of all, you need to decide your size and cut your mountboard pieces. My main pieces were: front 5cm x 8.5cm, base 3cm x 8.5cm, back 7cm x 8.5cm. I did not cut my sides or base at this point, as I wanted a really snug fit.
2. Work out the dimensions for your cover paper. Widthways is easy, as it needs to be 2cm bigger on each side than the mountboard. Lengthways, you will need to allow an extra 0.5cm each side of the spine for the piece to fold, plus 2cm each end. So my finished cover paper was 12.5cm wide x 20cm long. Decorate it, remembering that it is a wrap-around and the design needs to be multi-directional.
3. Mark your 2cm border on the back of the paper. Spread glue evenly on the mountboard pieces and glue down, making sure that they all line up at the top and bottom, and that you leave your 0.5cm gutters either side of the small spine piece.
4. Using your ruler as a spacer, draw a line across each corner of the cover paper, approx. 3mm from the corner of the cover, and at approx 45 degrees (you can do it by eye, it's OK to guess!) Cut along these lines.
5. Now we are going to fold in the long edges of our cover paper. First fold your flaps up without glue, to make a crease (just to make it easier to fold when covered in wet, sticky glue). Spread your glue along the first flap, making sure you get it right up to the edge of the mountboard. Lift up the whole piece, and press the edge against your work surface as you wrap your flap as tightly as possible around the mountboard (if you just use your fingers it won't be as even). You will know this is right if you can still see the shape of the mountboard- the paper shouldn't look domed. Repeat for the other side. Work the joints, smoothing the cover paper gently down into the gutters.
6. This next part is slightly fiddly. When you look at the corners of your piece, you will see that the cover paper overhangs the mountboard by 0.3cm on the long side. You need to use your bonefolder to tuck this excess around the corner and flatten it out. Do this on all four corners. Now you have a nice flat flap to fold up and glue, exactly like you did for the long sides, and when it is glued you will have a professional-looking mitre with no unsightly points.
7. Cut your liner paper 0.5cm smaller all round than your finished piece is (mine was 11.5cm x 19cm). Brush on your glue and, starting from the spine, smooth the liner down onto your piece, gently pushing the paper down into the gutters again. Now work the joins, and smooth it down anywhere it pops up, adding extra glue if necessary. Your covers are done!
8. To add sides and a base, simply measure your finished piece and cut your mountboard to fit. My sides have a slanted top edge, and my base is bigger by 0.5cm all round. Be aware that your cover paper will add bulk, so err on the smaller side when cutting. Add glue on three edges of the side pieces, and hold in position until the glue starts to set- with PVA this doesn't take long. Glue the base on, and leave the whole piece to dry overnight, using weights, clips or elastic bands if necessary to make a tight joint.

I hope this makes sense to you! If do you have any queries, please feel free to email me and ask- my email is on my profile. And if you make something using these instructions, link back to this post and I will come and admire your work!

January's Inchie Swap- Let's Celebrate

These are super-simple, as I couldn't think what to do for this theme! February's theme is 'Oriental' so I should be able to do something more interesting.

Colour: Glimmer Mist, Distress Inks, Brilliance Ink, Stickles, Sakura silver Pen Touch pen
Stamps: Cherry Pie (Klimt star) and Stampendous
Other: Wording from the computer, star sequin waste used as stencil, eyelets from my stash (hammered for texture)

January ATCs- Metal, plus Craft Stamper Blog Challenge

I had fun with these! The backgrounds were experiments in finding different ways to add colour to metal, and to create texture. They started off as an ATC sized piece of Mirri card, then I added random strips of self adhesive metal and embossing powder before running them through the Cuttlebug. The top one was coloured using paint dabbers and glimmer mist, the second one with different colours of Sharpies pens and Stazon (which helps to blend), and the last one was good ol' alcohol inks.

Colour: Paint Dabbers, Glimmer Mist, Sharpies, Stazon, Alcohol inks, Stickles, Distress Stickles, Cosmic Shimmer, Gilt wax, Krylon pen, Sakura Souffle pen (for faces), Distress Ink
Stamps: Elusive Images and Cherry Pie
Other: Vellum, acetate, Silver mirri card and ep, text from the computer

I also had a challenge in mind when I made these; Craft Stamper's blog is running a technique challenge each month, and this month's is to use the Cuttlebug. Isa made a beautiful piece for the mag using a wax-resist technique with the Cuttlebug folders. I have tried this, but my efforts were nowhere near as good as Isa's, so I went back to my favourite metal instead. Hope it's OK!

Colours CJ- Morti's purple book

a

Here is my second journal entry for this new CJ I am in. I can definitely say that this one is more challenging than the last as thinking of a colour theme that fits the stamp is hard! I love a challenge, though, so here is my entry in Morti's book. I was thinking of 'purple heart' for a while, and had decided how I wanted to do the background, but my original idea was to pin a tiny 'medal' to the art doll's chest. Well, as you can see, I was a little rough when cutting out, and pulled the poor creature's arm off! Perfect really, as she then was really a wounded soldier! The real purple heart medal has the phrase 'For Military Merit' inscribed on the back, so I had to change it to 'artistic merit'.

Colour: Dee Greunig Blending Blox, Distress Ink, Distress Crackle paint, Stickles, Versafine, Glimmer Mist, Stazon, permanent fineline pen, Liberon gilt wax
Stamps: Elusive Images, plus Morti's Paperartsy art doll
Other: Shrink Plastic, metal corners, ribbon, safety pin, all from my stash.

When I made the shrink plastic 'medal' I stamped on one side with Stazon, then sprayed the other with Glimmer Mist, not realising that the GM and the Shrink are not completely compatible! The back (the side I sprayed) has a very bobbley texture, and you can see this distorted the shape of the piece, too. However, I love the effect, as it looks less new and perfect than usual, so I may try this again!

Shh, don't tell anyone I'm here...

I told Paul I was just checking my emails, but was overcome by the urge to blog! I have two last projects from before Christmas, and the other project requires a slide-show, so here is my notebook swap piece. This was a bit of a long-winded swap for various reasons, but worth waiting for when I saw all of the entries. Everyone started with two pieces of semi-opaque polypropylene, 3" x 5", and altered them however they wanted. Mine uses Paint Dabbers and Glimmer mist, and has images stamped on the front and back of each cover- the dark blue colour is showing through from the back.

Colour: Paint Dabbers, Glimmer Mist, Distress Ink, Stickles
Stamp: Elusive Images
Other: Embelliscrap butterfly, metal tape and cuttlebug folder, charm, ribbon selvedge, Bind-it-all

When I put the colour down, I started by spraying with Glimmer Mist, then painted over it with a Paint Dabber. Note to anyone else that tries this: seal it with spray varnish between the two mediums- the Glimmer Mist is not a stable surface and the paint flakes off! It took me three coats of paint before I thought to do this :D

If you want to see the rest of the notebooks, check out the UK Stampers Cyberblog

Colours CJ- Sid's Red Book

I'm still in catch-up mode at the moment with photos. This is last month's CJ entry, in Sid's book. Everyone had to choose a colour as well as a stamp, and Sid's is (obviously!) red. Well, I rose to the challenge, and don't think it could be more red if I tried! I was actually inspired by Gustav Klimt, as Sid's stamp is design from a Klimt nude. I tried to recreate the patterns created by Klimt in this painting, Medicine, but in a more textural way. I used texture paste, red embossing powder, paint and gilt wax to create the pattern, and the main image is triple embossed. I hope Sid likes it- it looks even better in real life, I promise!

Colour: goache, gold and red ep, Liberon gilt wax, Brilliance ink, stickles, Sakura pen
Stamps: Paperartsy and Cherry Pie
Other: Texture paste, red gems.

Angel

Now I have used that title, I have David Bowie's 'Golden Years' playing in my head. This is for this week's UK Stamper's Sunday challenge, and I actually made it on Monday night! I want to make her a sister too, an ice angel...

Colour: Distress Inks, Glimmer mist, Whispers dye ink, Stickles, Brilliance, Liberon gilt wax
Stamps: All Cherry Pie
Other: Metallic organza ribbon, Papermania jewel brad, old buttons from my tin, Maya Road wings, mountboard, star sequin waste as stencil

I have used two products here that are not my usual: the Whispers ink in black I wanted to use as I knew it would be quite sheer rather than a dark, opaque colour, and the Liberon gilt wax, which is fab for rubbing over anything to gild it. I have had the wax for years, and rediscovered it thanks to Linda Baldock, who does amazing things with her Treasure wax (same sort of stuff). On her blog are links to her Youtube Tutorials. Go and be inspired!

You are invited...

At last, I can show you the pictures of my new CJ. Hurrah! I thought I would never have time to edit these pictures. Life is very busy at the moment, and I seem to be going from one thing to the other with barely a pause. Better to be busy than bored, though :D

I was just about to type my usual list of ingredients, then I realised I have used practically everything I own! (Not every colour, I hasten to add!). The main stamp is by Elusive Images, and the other stamps I have used are also EI apart from the little butterfly, which is Rubadubado. If anyone wants any other info, please email me and ask- I am only not adding it because I don't want to be typing for an hour LOL!

I have been working hard...

... and here is the evidence! My new CJ at UK Stampers- it's there, hidden by the Distress Ink, Glimmer Mist and Paint Dabbers. And yes, I'm talking about the stuff on my hands. Good job my friends understand me!

UK Stampers ATC's for October- Newest Stamps.

I realise these photos all seem to be taken at a really odd angle, but since these ATCs were all painted with a mixture of Perfect Pearls, Cosmic Shimmer and Stickles, I wanted to show the effect. My newest stamps at the time the theme was set were a set by ISC, which you may have seen on many other blogs- that face stamp is so beautiful that lots of stampers have it and use it well! It was nice to play around with effects, and I deliberately kept these simple, using straightforward stamping for a change! Don't worry, though, I have signed up for another CJ at UK Stampers, so expect to see me get carried away at least once a month!

Colour: Versamagic, Versafine, Cosmic Shimmer powders, Perfect Pearls (both used as paint), Stickles, Aurora ep, Stazon
Stamps: ISC
Other: Vellum printed with script (used for butterflies)